- 2015-2023 SHELBY GT350 - GT500 Mustang S550 Products
- G-LOC Brake Pads - Ford Performance FP350S Mustang - Front
G-LOC Brake Pads - Ford Performance FP350S Mustang - Front
This Pad fits the AP Racing Brake Kit used on the Ford Performance FP350S Race Car.
Fits the 9660 AP Racing Caliper with 18mm Pads.
Fits the Essex Designed AP Racing Radi-CAL Competition Brake Kit (Front 9660/372mm)- Ford Mustang Shelby GT350/GT350R Part Number 13.01.10043
We are proud to carry G-LOC™ brake pads for your street car, Auto-X, Track-Day and Race Car. Contact us for compound selections so you receive the proper pad compound for your needs. We have most applications covered! If it isn't listed, please ask.
***All R-COMPOUNDS ARE SUPPLIED PRE-BED***
Know what you need? Choose your compound from the options below.
The G-LOC™ GS-1 is our high performance street compound. GS-1 produces very little dust and very little noise, while maintaining excellent initial bite and torque for street use. GS-1 has been unmatched in the industry for disc/rotor friendliness as well as its longevity. This compounds excellent performance on the street provides incredible braking force without ABS intervention. G-LOC™ GS-1 operating range starts at ambient up to 800°F (426°C). GS-1 is suitable for ALL street cars, tow vehicle, fleet vehicle, and armored vehicles. G-LOC™ GS-1 is NOT recommended for ANY track use.
The R6 has been specifically engineered for Autocross applications. An ultra high cold torque compound delivering consistent performance from dead cold (0°F) up to 1000°F + (0°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. The R6™ compound is widely used for street use as well, but this compound will more than likely make noise on the street. G-LOC™ doesn’t recommend street driving on with R6 due to possible elevated levels of dust and noise. R6 is NOT recommended for road racing (closed circuit) use in most applications.
A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). G-LOC™ R8 is the first of our extensive lineup of racing compounds. Good initial bite along with excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. G-LOC™ does NOT recommended R8 for daily use on the street due to elevated levels of dust and noise. G-LOC™ R8 is a popular compound for open wheel type of race cars. R8 is also used on most Formula SAE team cars, along with shifter karts, dirt bikes, ATV’s, and even Mountain bikes.
The R10 has a much strong initial bite and higher coefficient of friction than R8. R10 still maintains our smooth release, excellent modulation and rotor friendliness that have been engineered into all previous G-LOC™ compounds. The R10 compound disc/rotor friendliness will lead the industry. R10™ broad temperature range and fade resistance is in excess of 1475°F (186°F /85°C – 801°C). G-LOC™ does NOT recommended R10 for daily use on the street due to elevated levels of dust and noise.
Raising the bar even higher is the R12 compound with an excellent initial bite, high and consistent torque, and outstanding fade resistance over and above the R10. R12 has a temperature range of 200°F to 1860°F (93°C to 1015°C). The G-LOC™ R12 continues our excellent release and modulation that has been engineered into all previous G-LOC™ compounds. The R12 is slightly more disc/rotor aggressive than R10 but more disc/rotor friendly compared to our competition. G-LOC™ does NOT recommended R12 for daily use on the street due to elevated levels of dust and noise..
The R16 is an extremely aggressive initial bite, linear torque curve and excellent fade resistance compound from our lineup of R-Series compounds. The R16 is a natural progression of the highly successful R-Series line of compounds from G-LOC™. R16 has a temperature range of 255°F to 2000°F (123°C to 1093°C). G-LOC™ R16 maintains our philosophy of modulation and release that has been the foundation of all other G-LOC™ R-Series compounds. G-LOC™ does NOT recommended R16 for daily use on the street due to elevated levels of dust and noise and the amount of heat needed to work properly.
The R18 is the pinnacle compound of the R-Series compounds engineered by G-LOC™. R18 is based on the same successful principals and fundamentals that exist in all other G-LOC™ R-Series formulations. R18 has more initial bite, overall bite, and even more controllable torque. The R18 offers the absolute most linear torque curve we have ever created. The thermal characteristics and coefficient of friction are of the highest offered by anyone in the braking industry . This revolutionary compound will lead the way in all major forms of racing (professionally and grassroots). R18 has a temperature range of 610°F to 2100°F+ (321°C to 1149°C+). G-LOC™ does NOT recommended R20 for daily use on the street due to elevated levels of dust and noise and the amount of heat needed to work properly.